MadModder
The Shop => Tools => Topic started by: slowcoach on January 15, 2011, 07:09:42 AM
-
Hi all, can anyone recommend a particular make of cut off saw for cutting brass and steel, but not at the same time obviously :lol: I use the one at work, but the guys complain when I chop stuff in their dinner break ::). So I fancy having one at home, so that I can annoy the wife when she's watching her soaps on tv :lol:
The one at work cost over £700 :bugeye: I'm not that rich :( so the cheaper the better :)
Cheers
Rob :thumbup:
-
A friend recently recommended this one for smaller more precise work. It will fit nicely indoors .I have bought one but still waiting for it to arrive from the USA.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140413814011&ssPageName=STRK:MEWNX:IT
I have a larger power saw for thicker stock
-
I have the Evolution 355mm dia cut off saw witha carbide blade...Makes short work of steel.. :)
Got mine form Aldi for £80 but they're about double that from Machine Mart
-
Hi There
I am a big fan of the Evolution carbide cut off saw as well.
Cheers Paul
-
A friend recently recommended this one for smaller more precise work. It will fit nicely indoors .I have bought one but still waiting for it to arrive from the USA.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140413814011&ssPageName=STRK:MEWNX:IT
I have a larger power saw for thicker stock
Bit small for what I need, but its a snazzy little machine, thanks for posting the vid Benchmark :beer:
Evolution it is, thanks guys.
Rob :thumbup:
-
I had one of those cheap chinky 14" abrasive chop saws, it was pretty rubbish, I only used it for hogging through stuff but the motor died in a spectacular and sparky fashion.
-
Yep the Evolution range of saws are looked on pretty favourably over on MIG-welding.co.uk
Aldi has them occasionally (probably about time they came up again) or sometimes B&Q have them on special