MadModder
Gallery, Projects and General => Project Logs => Topic started by: raynerd on July 23, 2009, 02:06:03 PM
-
I don`t know why I`m posting this - it isn`t neat and it isn`t pretty but it does run, to a fashion! It is going in the project logs because it certainly isn`t finished yet. I`m going away next week so won`t get any shop time and with this terrible virus H1N1-sbwhart rocker strain going around, I have been dying to see if I could get one to run.
This was more of a test than anything, to see if I could get the rocker concept to work but I`m 100% going to remake this engine fully blinged up. I quite like the enlarged piston block and I`ll mount this on a base plate for the final piece.
Sorry, not the nicest engine in the pack but I really enjoyed making it, probably took about 3 hours and then 30 minutes with it today fine tuning to get it to run. It doesn`t run very well at all but this is because I haven`t made the bushing and consequently there is too much play in the crank.
All will be fixed when I get home along with a good polish and bling up - certainly going to stick to the enlarged cylinder block and base, I like the look.
Thanks for introducing this Stew.
Chris
-
Way to go Chris
Well done :clap: :clap: :clap: :clap: every ones different just like snow flakes.
madmodderrockerprojectitus is certainly spreading around and don't worry when this virus starts to wain I've got a follow on lined up but that's a secwet .
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
Have fun
Stew
-
...and don't worry when this virus starts to wain I've got a follow on lined up but that's a secwet .
Stew, I have just been to the doctors and he has has told me categorically that the government have re-classified the H1N1-sbwhart rocker strain to "no longer effecting the population" and apparently I am one of the last to catch it...... now spill your secret!!! :poke: :poke:
lol :) only joking, I`m on holiday for a week so.... keep um` waiting lol
Chris
-
I've got a follow on lined up
Can you wait until I make a little progress on my mill engine?
-
I've got a follow on lined up
Can you wait until I make a little progress on my mill engine?
Dont worry I wont overload your antiviral system.
:lol:
Stew
-
Stew- did you work out why yours was running upside down? Mine also works much better belly up which will need correcting ....
-
I'll take a guess, could it be something to do with the downwards movement of the piston when it's going back in under pressure when upside down. :scratch:
-
After I'd soldered the bush I expected it to run correct way but no, it was only after I'd got rid of the sticky oil that it ran OK. I think what was happening, upside down it was getting a bit of help from gravity giving the extra momentum to overcome the sticky oil. You've probably got a little bit of friction in the system, with little engines their biggest enemy is friction, they like things on the slack side.
As the my old dad always said "a little bit of clearance never got in the way"
:lol: :lol: :lol: :lol:
Have fun
Stew
-
ummm - so my constant application of oil may not be helping! I still think it could be the crank....anyway, I`ll take a look when I get back in a couple of weeks. Cheers
Chris
-
Oi! You lot!!! :poke:
Why can`t you just give it a bit of a rest??? :hammer:
I`ve had to start one now! :bang:
(http://i110.photobucket.com/albums/n95/Dayjo/p7230003.jpg)
As if I haven`t got enough to do already...... ::)
David D
-
Stew, I have just been to the doctors and he has has told me categorically that the government have re-classified the H1N1-sbwhart rocker strain to "no longer effecting the population" and apparently I am one of the last to catch it......
Well you showed that was a lie StillDrillin - guess it is still a pandemic.
-
Oi! You lot!!! :poke:
Why can`t you just give it a bit of a rest??? :hammer:
I`ve had to start one now! :bang:
Kettle/pot/black..... :ddb:
-
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
:nrocks: :nrocks: :nrocks: :nrocks:
:proj: :proj: :proj:
Good fun her init
Stew
-
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
:nrocks: :nrocks: :nrocks: :nrocks:
:proj: :proj: :proj:
Good fun her init
Stew
Ohh, jolly, YESSS!!! :clap: :clap: :thumbup:
David D
-
Good Lord the virus is still rampant!
:proj: :proj: :mmr:
Thanks for posting that Chris. Everything is worth a post.
Eric
-
it isn`t neat and it isn`t pretty but it does run
What more do you need ...................... It, runs, so well done :beer:
CC
-
Cheers mate. Yes it does run but it certainly isn`t finished yet, but your right, I made the thread now because it does run! ... more to come I hope. :mmr: :nrocks:
-
I suppose I'd best have a think about one of these then?? I feel a bit funny...... Maybe I'm coming down with it too?
Nice start Chris, it'll be fun to modify it :borg: :thumbup:
Ralph.