MadModder
The Breakroom => The Water Cooler => Topic started by: steampunkpete on December 17, 2014, 04:00:44 PM
-
Imagine that Father Christmas has told you that you can have one tool for your workshop, of a value of not more than £200. :bugeye: :clap: :clap:
What will you ask him for?
Just one pressie remember, and not a farthng over £200 (or the equivalent in Pobble-Beads or whatever your local currency is).
-
I would ask it as a deposit on a mill :poke:
-
A new set of supported rails for cnc router or 2 x 5" kurt style milling vices for me
-
I would probably ask for TTS quick change starter set for the CNC mill.
http://littlemachineshop.com/products/product_view.php?ProductID=2441&category=
Eric
-
I would ask it as a deposit on a mill
No! That's cheating. :hammer:
Father Christmas does not hand out cash, Luncheon Vouchers, Nectar points, or put down deposits on your behalf, or any other non-pressie stuff.
-
well a blond will do
-
Between centres, boring bars :thumbup:
-
Would have to be a floor standing Pillar Drill :thumbup:
-
A decent sized square that's actually square. I seem to have the worst luck buying them.
-
I would think about future builds and gather any tools / tooling to make the job easier.
-
A pair of quality keyless drill chucks with integrated shanks (one R8 and the other MT3).
... do you need my shipping address?
-
As I seem to be the Santa figure around here (grey beard, pot belly and all), I decided to buy my own present. PMR #7BI, delivered yesterday.
-
I'm voting for Bob as the smartest of the lot!
but okay, asking from Santa uh, not for a lump of coal this year............ please, the bin is full....... maybe just have the elves clean up my Atlas shaper, replace the missing parts, and get it running, so when I walk into the shop I see it all complete and ready to go.
Oh wait and please make the Atlas shaper vise magically appear there, too! :bow: :bow: :bow: :bow:
-
well a blond will do
Good Choice!
Workshop Blond (http://www.lathes.co.uk/leblond/index.html)
-
well a blond will do
Good Choice!
Workshop Blond (http://www.lathes.co.uk/leblond/index.html)
:lol: :lol: :lol: :lol:
-
Bob posted well a blonde will do. Bob, I've led a largely untroubled life, but such troubles as there have been were all small, shapely and blonde. And they all without exception cost a deal more than two hundred quid.
I've asked Santa for a Potts type saw table from Hemingway; White Van Man came yesterday with something quite heavy that I'm not allowed to look at, so I think we're OK.
Eug
-
I'm with Eugene on this - a blonde will get through a lot more than £200 in a short time, leave you with lots of expectations and little actually delivered - anyway not good for your heart Bob :lol:
-
A thread counter for my Denford lathe. The only accessory that was missing when I bought it.
Dave.
-
well a blond will do
Just like some of the rubbish sold on the bay, it will look all nice and blonde/ shiny on top but will not always be what it seems underneath. You don't always get to see the quality report/ collar and cuffs before purchase either :lol:
-
I like Pete's Leblond, too. :lol:
I mean if you want a good lathe!
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
.
-
Well, I'd better not let the wife see this.... (she's not small (5'10"), but shapely and blond... From Finland!)
Kjelle (Happy with his blonde) :bow:
-
Well, I'd better not let the wife see this.... (she's not small (5'10"), but shapely and blond... From Finland!)
Kjelle (Happy with his blonde) :bow:
OK she'll do, wrap her up and send her over with a Christmas Tree from the forest :ddb:
-
lol :D
-
Sorry Andrew, she's mine! You'll have to pry her from my cold, dead hands...No, that's not the right expression... Whatever, off to work!
Kjelle
-
Nobody has asked me what I wanted (sniff, tremble bottom lip :().
I left out a list for Santa a couple of months ago to give him time to make something for me. I left it pinned to the mantlepiece.
I want a couple of linear digital scales so that I can modify my mini lathe. I will then be able to easily see where the cross-slide is and not where the handle is. That leaves plenty of change for a bigger birthday pressie from Santa, who, as a concession, also deals with my birthday because it falls very close to Christmas.
My wife said that she would liaise with Santa, but I had to show her where that nice Mr. Chronos' shop is so that she could tell Santa how to get there (that's what she told me). After I showed her where it was, she had to go back inside to get her umbrella while I waited in the car. She is a scatter-brain 'cos it wasn't even raining!
-
What I'd REALLY like for Christmas is more time and energy to get all those various projects wrapped up and finished :thumbup:
-
What I'd REALLY like for Christmas is more time and energy to get all those various projects wrapped up and finished :thumbup:
I'm with you Andrew! :thumbup:
Whenever I'm asked, the stock reply is. "I already have all I want. Though, a bag of spare time, would be wonderful".......... :)
David D
-
well opend all me presents no mill no blond :palm: got plenty of under pance and socks don't no y i have had the same socks on for a munth lol any way must say a big thank you to mick jhone and rob for geting me a set of 4 toolholders for me lathe thank you all so mutch hope you all get the presents you wonted and jhon got the best present his wifes helth is on the up