MadModder

The Shop => Tools => Topic started by: Pelallito on September 03, 2009, 09:54:03 PM

Title: New project 2
Post by: Pelallito on September 03, 2009, 09:54:03 PM

Here is another  photo.
Any guesses?
Fred

Title: Re: New project 2
Post by: DavesWimshurst on September 03, 2009, 10:28:41 PM

A camera mount for use from a car window? :scratch:
Dave

Title: Re: New project 2
Post by: DeereGuy on September 03, 2009, 10:52:25 PM

Hmm..good guess Dave..you could be right...it's a position device for something and that just maybe it.

Title: Re: New project 2
Post by: sbwhart on September 04, 2009, 01:38:56 AM

Whoops  :doh:  missed part two

Let me guess:- holding a magnifying glass

Stew

Title: Re: New project 2
Post by: Pelallito on September 05, 2009, 08:47:58 AM

It is a holding clamp. In particular it is a no weld knife vise. You put the blade inside so that it is held by rubber gasket material and you can swivel it any way you want to work on the handle. I haven't mounted it yet, so no photo of it in action. I need to make a lever to hold it down on the workbench.
Thanks for looking.
Fred

Title: Re: New project 2
Post by: DeereGuy on September 05, 2009, 11:32:27 AM

awh...ok never gave that a thought..nice job

Title: Re: New project 2
Post by: Pelallito on September 12, 2009, 10:00:13 PM

deere_x475guy,
Thanks for the kind words. I am also working on a small forge for heat treating and perhaps for welding.
I used two firebricks and made a steel box to hold them. i am also working on a small, 3/8th" venturi pipe burner to make it work.
I don't have all of the bugs out of it yet.
Regards,
Fred