MadModder

Gallery, Projects and General => Gallery => Topic started by: ukazak on August 25, 2014, 09:36:21 AM

Title: My Mill Engime
Post by: ukazak on August 25, 2014, 09:36:21 AM

Hi, Here is my recently completed 50% up scaled Mill engine, which I really had fun building. :D

(http://i1312.photobucket.com/albums/t521/ukazak/MILL%20ENGINE/MillEmgine-7_zps0177640c.jpg) (http://s1312.photobucket.com/user/ukazak/media/MILL%20ENGINE/MillEmgine-7_zps0177640c.jpg.html)

Title: Re: My Mill Engime
Post by: Sid_Vicious on August 25, 2014, 01:12:11 PM

Nice looking machine. You have been busy in your shop, posting up three machines you are finished with. I'm impressed.

Title: Re: My Mill Engime
Post by: tom osselton on August 25, 2014, 03:34:26 PM

Very nice!

Title: Re: My Mill Engime
Post by: ukazak on August 25, 2014, 04:29:47 PM

Thanks for comments,  i was away for a while, had nothing to share or so. I have three more machines completed but not yet posted. I will post them shortly.

Title: Re: My Mill Engime
Post by: krv3000 on August 25, 2014, 04:53:10 PM

nice engine and good work

Title: Re: My Mill Engime
Post by: SwarfnStuff on August 26, 2014, 02:57:49 AM

Inspirational, congratulations ukazak  :clap:

Title: Re: My Mill Engime
Post by: Meldonmech on August 26, 2014, 05:31:42 AM

  Hi ukazak, did you make this engine from solid metal, or  was it made using castings?  It looks well.

                                                                 Cheers David

Title: Re: My Mill Engime
Post by: ukazak on August 27, 2014, 05:02:44 AM

Thanks, all solid materials. No castings anywhere at all.

Title: Re: My Mill Engime
Post by: vtsteam on August 27, 2014, 08:14:27 AM

Very nice! How large is it, ukazak?  :thumbup: :clap:

Title: Re: My Mill Engime
Post by: ukazak on September 07, 2014, 08:14:50 AM

Quote from: vtsteam on August 27, 2014, 08:14:27 AM

Very nice! How large is it, ukazak?  :thumbup: :clap:

it is 50% up scaled from the original plans.

Title: Re: My Mill Engime
Post by: vtsteam on September 07, 2014, 09:57:57 AM

Original plans? And they show an engine that is....?

I just want an idea of what I'm looking at.

Is it bigger than a breadbox?  :)

Title: Re: My Mill Engime
Post by: ukazak on September 22, 2014, 12:55:22 PM

Quote from: vtsteam on April 24, 2439, 11:11:17 PM

Original plans? And they show an engine that is....?

I just want an idea of what I'm looking at.

sorry, it is Elmer's #33.

Is it bigger than a breadbox?  :)

Title: Re: My Mill Engime
Post by: vtsteam on November 30, 2014, 09:09:25 PM

Ahhh, clues!  :thumbup:

Elmer's #33 X 150%

Will have it figured out shortly..........  :coffee:

Title: Re: My Mill Engime
Post by: vtsteam on November 30, 2014, 09:16:30 PM

It's about 11" long and 4-1/2" wide, with a bore of 3/4" and stroke of 1-1/2". A nice solid size!  :beer: