MadModder

Gallery, Projects and General => How do I?? => Topic started by: parvum on June 30, 2013, 11:08:57 AM

Title: IMO inverter remote control
Post by: parvum on June 30, 2013, 11:08:57 AM
Hi all Does anyone know how to connect a remote  potentiometer to an IMO EDX 0.75 KW inverter ?I don't want all the bells and whistles on their 60 quid remote pod. Many thanks
Title: Re: IMO inverter remote control
Post by: John Rudd on June 30, 2013, 11:37:20 AM
Yes I do........

How adept are you at electrics?

You will need to program the vfd as well.......

You will need a 10k potentiometer, a small box to put it in and three wires soldered to it, the three wires then connect to the vfd on the smaller of the set of terminals.....

The three wires connect to terminals 9,10 and 11. 10 goes to the centre connector of the pot

You need to change Parameter A01 to 002. The factory default is 000

Shout up if you need any more help...
Here's a link to the basics..
http://document.technique-achat.com/IMO/idrive/Mode_emploi_EN_FR_IT.pdf
Title: Re: IMO inverter remote control
Post by: parvum on June 30, 2013, 01:03:01 PM
John, you are a gentleman and a scholar, many thanks.

Paul