MadModder

The Shop => CNC => Topic started by: Brass_Machine on November 25, 2020, 09:01:14 AM

Title: New 3D printer
Post by: Brass_Machine on November 25, 2020, 09:01:14 AM
I think I have done all to my Ender 3 that I can do without replacing frame pieces to extend it.

I have actually decided to build a second printer...

Found this CoreXY printer that has a decent design and good following.

BLV MGN Cube (https://www.blvprojects.com/blv-mgn-cube-3d-printer)

Will be powered by a Duet 3 and Rasperry Pi.

I have the a 320mm bed to go in it, but I have the files to do an even larger bed (400mm). The frame/rails I am using will allow for a Z of 595 mm.

Doing the triple Z thing to allow for 3 point bed leveling.

Got most of the parts in. Will be starting the build in the next month or so.

Eric
Title: Re: New 3D printer
Post by: MetalMagus on December 01, 2020, 07:07:10 AM
Hi Eric,
Take a look at the Hevort 3D printers on Thingiverse, GitHub and Facebook.

https://www.thingiverse.com/thing:3532039

Regards

Sean
Title: Re: New 3D printer
Post by: Brass_Machine on December 01, 2020, 09:14:58 AM
Hi Sean,

Thanks for the link!

Someone has taken the HeVort bed mounts and have adapted them to BLV Cube. May end up doing some hybrid monstrosity of printer...

Have you built a HeVort?

Eric
Title: Re: New 3D printer
Post by: MetalMagus on December 02, 2020, 06:59:04 AM
I've started printing some of the parts. But, that's as far as I have got. Life and other projects keep getting in the way. But I follow the FB group and will get back around to it soon.

Cheers

Sean