MadModder
Gallery, Projects and General => Gallery => Topic started by: S. Heslop on January 04, 2015, 10:01:55 AM
-
I made a little peanut lighter, and a video about making it.
-
Nice job. Good video (I watched it without sound)...
Eric
-
Nice job. Good video (I watched it without sound)...
Eric
Might've been an improvement! I did a worse job than usual with the commentary.
-
Well done, I was waiting for the exploding cigar at the end though. Might have to make one of these in brass. :beer:
-
Very well done that man :clap:
did you say you have a link to the plans?
Lyn.
PS: i would need to MOD it thou as i have never tried to cut threads with the lathe, push fit will do me.
-
(http://iforce.co.nz/i/phsgi11e.krd.png)
I had them linked in the video description on youtube. Calling them plans seems a bit much, i'm not a good draughtsman. They're what I was working towards as a guide, but most stuff was made to fit rather than strictly adhering to the plan.
Also don't be put off cutting threads on the lathe. If I can do it i'm sure you can. Although you could try something with magnets to hold the cap on.
-
Oh cool! I will have to attempt this!
Thanks!
Eric
-
I like the video, the drawings and the project.
Thanks a lot for taking the time to post
Cheers!
Phil
-
A neat little project, well done.
Cheers David
-
Thanks for the kind comments!
-
Is setting peanuts on fire a common entertainment in geordie land?
-
Is setting peanuts on fire a common entertainment in geordie land?
It's very traditional.
-
Great video as usual Simon, and I got a workholding method out of it -- the lighter in the piece of plywood. I'll be using that one for sure! :thumbup: :thumbup: :bow:
-
Hi Simon, as others havecsaid another good project well filmed and explained, thanks for taking the time to post
Cheers Mick