MadModder
Home Base => Introductions => Topic started by: rotorhead on July 15, 2012, 01:41:57 AM
-
Hello everyone,
My name is Chris, from North Lincolnshire, I'm a near retirement lorry driver with a fervent interest in home engineering.
I have an old but very serviceable Colchester Master, Elliott Rapidmil, Clarkson Tool & Cutter grinder, Progress 3 pillar drill, MMA, Aldi Gasless Mig and bottles.
I seem to make things to make things to make things, know the feeling?
I rebuilt a Bensen Gyroglider, with my own fully bearing'd rotorhead, regretfully I've no digital photos of any of it.
In the past I've done quite a bit of machining for local garages, Cylinder heads, Brake disks and the like.
I really mostly enjoy modifying my machinery, I'll post a few of the mods in time, I have already posted 'visit my shop' in the 'Shop' section before venturing onto here, apologies for that oversight.
-
Hi and welcome to us :wave:
-
Hi Chris! :wave:
Big welcome to the Collective. :borg:
With your credentials. You'll do nicely! :thumbup:
Join in.
Show pics of what you do. Have fun..... We do! :)
David D
-
Hi and welcome
-
Hi there Chris :wave: a warm welcome to the cube :borg: :lol:
Tim
-
Hi All,
Thanks for the warm welcome Lads, I'll have a go at posting some pics very soon.
-
hi Chris
Welcome to the forum from another lincolnshire lad i am in Gainsborough i have been through your village when we where diverted off the M180 on the way back from the humber after i had been fishing . Pull up a chair enjoy yourself and have fun.
-
Hiya Chris!
Welcome to the collective :borg: Again :borg:
Figured I would do it again!
Eric