MadModder
The Shop => Our Shop => Topic started by: marky123 on April 10, 2011, 05:39:05 PM
-
Hiya
Not plumb,not pretty but fixed,bolted and level.Cost was a few welding rods, 2 masonry drill bits, a couple of Rawlbolts and a tenner for a bit of plate.
Dug out of a field
(http://img.photobucket.com/albums/v299/marky123/Image178.jpg)
chopped and shopped
(http://img.photobucket.com/albums/v299/marky123/Image190.jpg)
I gave up on bolting it to the floor,so I dropped some studding in the rawlbolt holes and fixed it with some molten lead.
I also dropped a paving slab in the bottom to give it a bit of extra mass,hopefully to dampen any wobbles that may occur.
Need some clamps and Tnuts now!!!!
MARK
-
Nicely done Mark :thumbup:
Good bit of recycling :med: :clap: :clap: :clap:
Rob
-
I like to see something/ anything given a new life, Mark. :thumbup:
Well done! :clap: :clap:
David D