MadModder
Gallery, Projects and General => Gallery => Topic started by: matnewsholme on September 24, 2009, 02:34:42 PM
-
just a minor mod. my lathe is a variant on the common 920 lathe. The handwheels all run withouit any bearings and are a pain to adjust.
So I knocked up a new mount for the cross slide an incorporated a couple of ball bearings. makes a major difference to the smoothness of the action :D I realise that I should really have used thrust bearings but there was no room to get any in and I think the standard ones will be ok.
Matt
(http://i363.photobucket.com/albums/oo74/mnewsholme/P1323_20-09-09640x480.jpg)
this shows the old mount on the left and the new one on the right.
(http://i363.photobucket.com/albums/oo74/mnewsholme/P132401_20-09-09640x480.jpg)
(http://i363.photobucket.com/albums/oo74/mnewsholme/P1324_20-09-09640x480.jpg)
a couple more views
(http://i363.photobucket.com/albums/oo74/mnewsholme/P1839_23-09-09640x480.jpg)
and finally the part fitted :D
-
Nice one :thumbup: :thumbup: :thumbup: :thumbup:
I wouldn't have thought having thrust bearings would have made much difference, very nice mod.
Thanks for showing
Stew
-
That is very nicely done Mat
Do let us know how much differance it makes please as this is on my list (near the top actually).
Gerhard
-
hi geroli
Its made a very noticeable difference. Slide is very smooth now, whereas it always used to bind at certain points in travel before, plus Ive been able to tighten gib screws up quite a bit which improves rigidity, Parting is a lot better. Im so impressed im in process of doing a similar mod to the compound on this lathe and the xslide and compound on my 7x10 lathe too.
Matt
-
That is nice to know - I have a lot of stuff that I want to do -nice to know the ones that make a diff.
What size is the bearing??
Nice looking mod aswell.
Gerhard
-
there are two bearings. a 16x8x5 at the crossslide end and a 22x8x7 at the handle end. I can do a sketch if your interested with some dimensions on.
matt
-
That would be very handy
No rush as there is a lot to do stil before this one is at top of list - and a lot would depend on the scrap box.
Gerhard
-
Hey Matt,
That is a very cool mod. Nice professional results.
Eric