MadModder
Gallery, Projects and General => How do I?? => Topic started by: boatmadman on December 14, 2009, 06:21:52 PM
-
Hi,
I think I need a new vice for my X2 mill, could anyone please recommend a suitable one?
Thanks
Ian
-
ive got this vice and im using a similar sized machine also the fixed jaw on each side has a threaded hole very handy
http://cgi.ebay.co.uk/50MM-2-ToolMaker-Vice-Harden-Milling-Grinding-US_W0QQitemZ160369693793QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item2556c75461
thanks colin
-
I second the screwless vise.
-
Make it three votes.
I have one very similar to the one Colin posted. It fits nicely on my X2 and I can drop it in the vise from my knee mill if I need it there, already squared up.
As noted, the fixed jaw has an M8x1.5 hole on each side, very handy for mounting a stop.
-
I've got one of these screwless vices and it works OK for me. You'll need to make some clamps for it, mine didn't come with any.
I've also got a 4" vice, similar to this one Small vice (http://cgi.ebay.co.uk/4-H-D-SWIVEL-BASE-MILLING-MACHINE-VICE-OGL-59004H_W0QQitemZ170419479927QQcmdZViewItemQQptZUK_Hand_Tools_Equipment?hash=item27adcae577). Without the swivel part, it just fits the X2.
-
Thanks guys.
Anyone got any comments on these? (the 2 and 3 inch vices)
http://www.chronos.ltd.uk/acatalog/Chronos_Catalogue_TWV_Swivel_Milling_Vices_104.html
Ian
-
Apart from they no longer stock them ..... according to the ad :bang:
-
No, They have temporarily stopped taking orders to catch up on backlogs - the whole catalogue is suspended
Ian
-
Darren, the top of the Chronos page says they aren't accepting orders for anything while they clear up a backlog. Sounds like Santa will have a lot to carry this Christmas.
They probably got behind due to attending the recent ME Expo at Sandown.
Andy
-
Ah, I see, my mistake .... :thumbup:
-
I have an X2 and have the quick vice which came with it which I do NOT recommend, it is OK after I sorted it out as StillDrillin showed me in one of his posts...
(http://www.chesteruk.myzen.co.uk/store/product_detail_pages/images/Quick%20Action%20Vice%20-%20CQ.jpg)
I`ve recently seen one of these screwless vice on an X2, looked and worked great. Not got one myself, yet, but certainly worth considering!
Regarding Chronos, I bet they are missing a fair bit of Christmas trade suspending there orders. Although even now, 10 days before Christmas it is unlikely it would arrive in time anyway!
-
Chris,
My "free" quick vice is still doing all I ask of it. Still straight & square...... :D
All I did was to mill the locating faces correctly, & assemble with loctite, everywhere! :thumbup:
David D
-
David,
Could you point me at the post you did on fixing the vice, I cant pick it up in a search.
Thanks
Ian
-
I'll add my voice to the bunch happy with their screwless vises. I have that 2" and it's great. Square as square gets. The only grump I have with the thing is when I use the short cross pin. Sometimes it wants to twist in the slot and not tighten correctly. Annoying but easily straightened out.
I hope Chronos is not too awful backed up. I just ordered a Glanze profiling tool from their eBay store yesterday.
-
David,
Could you point me at the post you did on fixing the vice, I cant pick it up in a search.
Thanks
Ian
Here you go Ian!
http://madmodder.net/index.php?topic=848.msg11229
Apart from the terrible fixed jaw face, there was no problem, other than needing deburring & screwing together firmly with loctite.
Good luck! :thumbup:
David D
-
Thanks for that David.