MadModder
The Breakroom => The Water Cooler => Topic started by: chuck foster on October 07, 2009, 09:18:55 PM
-
hello all :wave:
i'm looking for plans to build a spring winder, most of the springs i need to wind are 1/2" o.d. or smaller.
any help will be great :beer:
chuck :wave:
-
Chuck,
Start with the lathe. I'm sure you'll find something on the net if you google.
Bernd
P.S.
Amazing. I did a search of Madmodder. Zilge. Same for HMEM. Nada
The net didn't show much either. Looks like you'll be the first to make one and post it on a forum. Kozo shows how to make one in his engine books he wrote.
-
Hi Chuck.
Try http://home.earthlink.net/~bazillion/intro.html for a LOT of info on spring making.
-
Great find Jim, :thumbup:
-
Hi Chuck
There is a picture on this site that seems easy to make if it is what you had in mind
http://www.hemingwaykits.com/acatalog/Universal_Spring_Winder.html
Gerhard
-
Chuck, this might be worth a look. It starts with using drills, but gets to lathes further down the first page.
http://home.earthlink.net/~bazillion/setup.html
Andy
-
Great find Jim, :thumbup:
Thank you :wave: