MadModder
The Shop => Tools => Topic started by: sbwhart on February 16, 2018, 01:58:50 AM
-
Another bit of kit to make again this came from an old copy of the american machinist
(https://i.imgur.com/jChgxYLl.jpg)
(https://i.imgur.com/zPgoB8zl.jpg)
(https://i.imgur.com/RVoHjobl.jpg)
Being operated with just one screw its less fiddly to use than a two screw toolmakers clamp.
I've attached my drawings if you want to make one
Stew
-
I've attached my drawings if you want to make one
Stew
Looks a useful thing to have available. Neat metric drawing too. Is the loco being made with metric dimensions, (threads etc) or all American/imperial?
Thanks for the drawing.
Pete
-
Hi Stew
An interesting idea, must add to my inbetween big projects list.
Cheers David
-
I've attached my drawings if you want to make one
Stew
Looks a useful thing to have available. Neat metric drawing too. Is the loco being made with metric dimensions, (threads etc) or all American/imperial?
Thanks for the drawing.
Pete
Pete
I’m using metric threads on the loco except where ME is stipulated and as my machinery is metric I convert to metric as I go as I’m nominally following drawings by Don Young.
Stew
-
I’m using metric threads on the loco except where ME is stipulated and as my machinery is metric I convert to metric as I go as I’m nominally following drawings by Don Young.
Stew
Thanks for the info. That must be quite a headache for you, constantly converting the drawings, but you are doing a brilliant job. :thumbup:
Pete