MadModder
The Shop => Tools => Topic started by: sbwhart on April 10, 2009, 02:27:17 PM
-
Hi Madmodders
My Startright drill has an adjustable depth stop the only problem is that it doesn't stay put it moves, the solution loc-nuts
(http://i431.photobucket.com/albums/qq32/sbwhart/100_1409.jpg)
Into the old scrap box for some stub ends of steel, into the three jaw chuck turn the dia and nurl , drill:- starting with centre drill, then 8mm, then 12mm then 14.2 mm then tap M16 then part off to length.
(http://i431.photobucket.com/albums/qq32/sbwhart/100_1412.jpg)
(http://i431.photobucket.com/albums/qq32/sbwhart/100_1413.jpg)
(http://i431.photobucket.com/albums/qq32/sbwhart/100_1414.jpg)
(http://i431.photobucket.com/albums/qq32/sbwhart/100_1420.jpg)
Job Done :thumbup:
This will make the drill a far more usefull and accurate bit of kit.
Cheers
Stew
-
Cool Stew...
Nice job. :borg:
Eric
-
Good one Stew,
Quickie job fixes problem. :ddb: :ddb:
Bogs
-
Thanks chaps
I'm trying to get some of those little niggly little jobes done before I start back on the loco, I've got a bad habit of getting fully absorbed with one objective and putting other jobs off and making do with their shortcommings:- thats just me.
Stew
-
It's nice when you can make these bits init :thumbup:
-
nice job there simple easy fix.
now thats what I need a box full of offcuts before I retire :)