The Craftmans Shop > New from Old

Rebirth of a 6 Foot Flail Mower

<< < (32/32)

awemawson:
All ground back - a bit of pad welding and it's all back together and workng a friend having helped physically lugging it back to the tractor shed.

The disks that form the support for the stub axle are 10mm thick but the tube I'm welding to is only 3 mm thick so hard to ensure good penetration in one without burning through the other - or at least that's my excuse !

I did a quick four stripes in the rushy bit of the paddock and it seems to be working ok.

  [ You are not allowed to view this attachment ]  

vtsteam:
 :thumbup: :beer:

Navigation

[0] Message Index

[*] Previous page