MadModder
The Shop => Wood & Stuff => Topic started by: NormanV on July 25, 2021, 11:52:39 AM
-
I have been a member of this forum for nine years and am often frustrated when I log on to find no new entries. It is so often that we rely on Andrew with his amazing projects. Thank you Andrew. I have not been doing a lot of engineering recently but I have been irritated by my two metric micrometers rattling around in a drawer. I haqve made a box for them and thought that I should share it.
-
Can you share some pictures of your boxes Norman, I'm sure I'm not the only one who would like to see them.
Not much happening here project wise, but I did spend a couple of hours today rolling around on the floor of the tractor shed trying to adjust the brakes on the forklift. No pictures as I was knackered, filthy and VERY wet - the heavens opened, we had just shy of 30 mm of rain in a short space of time, Brakes still useless - I suspect the pedal / servo linkage needs tweaking.
-
You were lucky, Andrew. I had to don my oilskins to put a tarpaulin over the roof of my workshop, which is now wetter inside than out :(
-
Oh dear, do you need to borrow a dehumidifier to stop the rust? I have a decently large 'contractor' one.
-
I am not sure what is happening but when I try to load pictures I get an error code "HTTP error 500"
-
Strange. If you email them to me I’ll see if I can upload them to the thread.
-
Oh dear, do you need to borrow a dehumidifier to stop the rust? I have a decently large 'contractor' one.
Thanks for the offer, but I have a small domestic one, and that seems to have worked wonders overnight. A couple more days and I'll be happy that it's all dried out. Maybe there'll be a little moisture left in the lagging, but that can sort itself out over time.
-
hi just my bit their will be a post Cuming up soon