MadModder
Gallery, Projects and General => Gallery => Topic started by: Pelallito on February 09, 2009, 06:41:28 PM
-
Here are some of the things that I have made.
Some where made in school and others at home. I had to dump some of the photos. This was first attempt at video, be kind.
School- a friend hot blued it for me. I have another school project, but no photos, yet.
(http://i228.photobucket.com/albums/ee98/pelallito/DSCN1681Medium.jpg)
(http://i228.photobucket.com/albums/ee98/pelallito/DSCN1682.jpg)
Home-
Lautard knurler-
(http://i228.photobucket.com/albums/ee98/pelallito/DSCN1666.jpg)
(http://i228.photobucket.com/albums/ee98/pelallito/DSCN1665.jpg)
Combined micrometer lathe stop and indcator holder for Atlas lathe.
(http://i228.photobucket.com/albums/ee98/pelallito/DSCN1668.jpg)
Travelling steady rest for Atlas lathe-
(http://i228.photobucket.com/albums/ee98/pelallito/DSCN1671.jpg)
KMG Clone motor and remote control for VFD-
(http://i228.photobucket.com/albums/ee98/pelallito/DSCN1676.jpg)
KMG
(http://i228.photobucket.com/albums/ee98/pelallito/DSCN1675.jpg)
KMG running-
(http://i228.photobucket.com/albums/ee98/pelallito/th_DSCN1678.jpg) (http://s228.photobucket.com/albums/ee98/pelallito/?action=view¤t=DSCN1678.flv)
Hope that yo like them.
Regards,
Fred
-
Hey Fred!
Is the first one a press?
Love the belt sander!
Eric
-
Nice equipment you've made there. :thumbup:
I see your a student of Lautard. Best three books I own. :headbang:
Bernd
-
Cool Stuff!
Nicely done :)
Look forward to the other projects along the way :dremel:
-
Nice builds Fred, Looks like a little press for bushings etc?
The KMG is a really nice piece of kit too..... I've got to ask (it's compulsory!) ..... What's next on your list?
The video works for me :thumbup: If you have any longer ones in future you may need to try Youtube.... Photobucked rejected some of mine due to file size!! (well it was 8 min's long!)
Ralph.
-
Nice tools Fred :wave: .
I've got to ask what a KMG ???? :scratch:
Cheers
:wave:
Stew
-
Nice tools Fred :wave: .
I've got to ask what a KMG ???? :scratch:
Cheers
:wave:
Stew
Hey Stew.
KMG= Knife Maker Grinder :bugeye: :jaw:
Regards CS
-
Stew,
Here is the website for the real KMG- http://www.beaumontmetalworks.com/index.html
CS,
I never knew that the initials stood for that. :bang: Thanks for enlightening me.
Eric and Ralph,
it is a nice little press. The only parts I did not make, were the 4 allen screws holding the cover.
Bernd,
Unfortunately, I only have his first two books. I need to get the rest.
Spin,
I started on a G. Thomas 4" manual rotary table and got side tracked. I made the top, and got mad at myself and put it aside for a while. I took a small cut with my milling adapter in the lathe and it shifted. I truly dislike that thing! :hammer: I took a little too much material because of that. I will weld it up and clean it up. That blasted thing turned a brand new dovetail cutter into junk in the blink of my eye when I tried to cut the dovetail for the travelling steady. :bugeye: I ended up taking it to work and made it on our vertical mill.
Thanks for the kind words.
Regards,
Fred
PS Ralph, I had another small video that I took at the same time. I deleted it because I did not know I was filming at the time. I could see a great view of my shop safety sandals and calves along with the floor and walls. :D :)
-
Hi Fred
Thanks for the info on the KMG, very interesting video it certainly a very versitile piece of kit. :borg:
Cheers
:wave:
Stew
-
Very nice workmanship there, that press looks like a lot of work and the belt sander looks really useful.
Nice..... :thumbup:
-
Stew and Darren,
Thank you both!
Regards,
Fred
-
PS Ralph, I had another small video that I took at the same time. I deleted it because I did not know I was filming at the time. I could see a great view of my shop safety sandals and calves along with the floor and walls.
:lol: You should have kept it for future reference! (all be it upside down!) Just to laugh at mostly :lol:
When you say "sandals" do you mean litterally open toed??? Brave man if you do, when working with knives!!! :bugeye:
Made any new stuff lately? Finished any old outstanding stuff off? :poke: You got to ask ehh?? :)
Ralph.
-
Hi Ralph,
I just wear the sandals(yes they are opened toe) when I am in the shop taking photos. Normally I only go in there wearing shoes. I am a little daft, but I try to be safety conscious!
I am working on a project right now. I am glass bedding a 10-22 MOA rifle into a cherry wood stock. It is going fairly well so far. I have not glued it in permanently, so far. :bugeye:
I still have to tweak some of my previously finished tools that I posted.
Thanks for the enquiry.
Regards,
Fred