MadModder
Gallery, Projects and General => Project Logs => Topic started by: davidcurtis021 on March 14, 2010, 04:16:09 PM
-
while i wait to buy a lathe i thought i might make a start on this piece from germany its a 1927 doll 314/1 so i'm told i'm still trying to find pictures or dimensions from an original so i'm havong to work with what i have
(http://i730.photobucket.com/albums/ww309/davidcurtis021/IMG_4268.jpg)
(http://i730.photobucket.com/albums/ww309/davidcurtis021/IMG_4267.jpg)
As the pictures show a new firebox needs to be fashioned as well as a new boiler tube
(http://i730.photobucket.com/albums/ww309/davidcurtis021/IMG_4269.jpg)
boiler endcaps will be reused as as will all the moition gear with the exeption of the homemade flywheel i know a six spoked flywheel is what should be there so until i have dimensions and instruction from my tutor that part will remain uncompleted
the rest should be doable with a drill press and hand tools.
-
Hi David thats a nice old interesting engine be careful you don't over do the restoration and lose its value.
have fun
Stew
-
By `ek David! There`s some work needed there! :bugeye:
Can you replicate the brickwork type firebox?
Using an old Jensen box might cause a stir......... (http://www.mysmiley.net/imgs/smile/winking/winking0001.gif) (http://www.mysmiley.net)
David D
-
yes i think so david i have some wilesco panels with the same brick profile its just whether i can make the cutouts suit. i have a spare doll whistle and a safety valve on another doll engine as a template it isnt really important to be a hundred percent genuine as its already been well and truly modified.