MadModder
The Shop => Metal Stuff => Topic started by: PekkaNF on March 22, 2022, 04:42:13 PM
-
Mentioned on other thread that I use sometimes wood in metalworking. Here I had thin walled pipe that would have been awkward to hold on another way. As you see wood is pretty elastic and I produced scalloped edge with end mill....should have been feeding a bit slower.
Not finest work but will do on this
-
Great work, Pekka! :clap: :thumbup:
-
Thats pretty cool!
-
Thank you guys!
-
Pekka, what are the parts for? :beer:
-
Spirit levels for sort of king way alignment tool.
I have vials. I got today spherical washers to allow tilt the vial tubes for adjustment, but looks like I need "plan B" to execute it.
-
:proj:
-
Cool work holding solution, and a very cool project. Nice one.