MadModder
The Breakroom => The Water Cooler => Topic started by: krv3000 on April 05, 2013, 07:40:23 PM
-
hi can any one tell me the pich and size of the thred on the spindel ie the bit the chuck gos on to
-
Its a long time ago since I had one of those mine was on its treadle stand ( by was motored )
as to you question if my single grey cell is Ok its 7/8 whit
there is plenty of info here http://www.lathes.co.uk/drummondroundbed/
Tony comments on the spindle size about halfway down the second lump of text
Stuart
-
The thread on mine is 3\4 whitworth with a 25\32 register ,
-
thanks all for the help