MadModder
Gallery, Projects and General => Project Logs => Topic started by: John Rudd on March 19, 2012, 04:45:57 PM
-
Hot on the heels of the questions I posted elsewhere, I decided to do a project build log..
So far details are:
Single cylinder design, bore 1 inch with a corresponding stroke...Compression ratio yet to be determined..
Piston- Aluminium with CI rings *2
Liner -Cast Iron
Cylinder -finned Aluminium
Head-Aluminium
Conrod-Aluminium...Getting boring now.... :lol:
Crank- built up from BMS and Silver Steel
Crankcase- err well I think it might be a Steel but that could change......
Flywheel- CI around 3-4 inches
Ignition- Own design CDI ( ambitious :lol:)
Lubrication- usually a coupleof pints of beer.....err I mean oil
We'll see how things progress as 'Er indoors has buggered off to 'Er mothers wi' me camera... :coffee:
Suffice to say, when she gets back I'll take some snaps
-
Hi John
Will the engine be taking to the air ?
Rob
-
Nope Rob,
Its just a bit of fun...If it works out I might build another to put in my boat...( River Queen by Kingston Mouldings) if I can make it a bit more compact..
-
Hi John
:scratch: ,,,,,, i thought thee River Queen was a steam boat :)
Rob
-
Hi John
:scratch: ,,,,,, i thought thee River Queen was a steam boat :)
Rob
Well I had other ideas......until my mate told me they were not allowed ic engined boats because of noise..... :coffee:
Well looks like a build for fun engine.... :D
-
Hi John
:scratch: ,,,,,, i thought thee River Queen was a steam boat :)
Rob
Was that not the African Queen :lol: :lol: :lol: :lol:
Well I had other ideas......until my mate told me they were not allowed ic engined boats because of noise..... :coffee:
Well looks like a build for fun engine.... :D
-
Bit of an update...
I'm on piston mkII, first was damaged when I tried machining it not properly secured on the mill...School boy mistake.. :Doh:
2nd, well not too happy with the milling on that one and the little end hole seems a bit off centre..(Must be my eyesight.. :lol: )
I made some piston rings but they broke!...
So progress is a bit slow... :coffee:
Think I'll go back to building my Idris steam loco project