MadModder
Gallery, Projects and General => Gallery => Topic started by: davidcurtis021 on March 09, 2010, 03:07:21 PM
-
i'm putting this up because i thought it might help members understand how i have arrived at this forum and also assmall as it is i am really proud of it even though my friend david was watching me carefully to make sure i didnt do anything silly
(http://i730.photobucket.com/albums/ww309/davidcurtis021/IMG_4260.jpg)
the top part of the whistle was missing apperently a common occurence with this model unfortunately the manufacturer went out of buisness 50 years ago so the part had to be made.
Here it is sitting proudly in its proper setting.
(http://i730.photobucket.com/albums/ww309/davidcurtis021/IMG_4258.jpg)
-
Its fun turning that 1st part. When comes out good, even better!
good job :thumbup:
Eric
-
that is one fine addition to your steam plant :thumbup: .....................any chance we can get a video of it in action???
your friend david needs a pat on the back for taking the time to help you out............way to go david :thumbup: :thumbup:
chuck :wave:
-
And here`s my apprentice, hard at work...... :thumbup:
(http://i110.photobucket.com/albums/n95/Dayjo/P2200013.jpg)
(http://i110.photobucket.com/albums/n95/Dayjo/P2200011.jpg)
We had a crackin` afternoon...... All over, much too quickly.......
David D
-
davidcurtis021
Welcome to MadModder David. You have made a fine start in machining parts for steam engines. While it might seem intimidating at first, remember it is only a bunch of parts assembled that make the engine so you make them one part at a time. We will be waiting to see what future projects you undertake. Thanks for sharing this first part with us. :ddb: :ddb:
Cheers :beer:
Don