Gallery, Projects and General > Project Logs
a filing project
(1/2) > >>
krv3000:
hi all i was given this vice sum time a go so i decided to clean it up if i was at work i wood have just gone over it with the surface grinder but i had to settle with a file and its still square next thing to do is the slide and vice jaws


vtsteam:
Kinda cool looking shape for a vise. I like it!  :thumbup:
Meldonmech:
 
 Hi Bob, I love to see hand tools used.  I went through a stage when younger when I used power tools for every job.  Then I became interested in hand tools, and use them whenever practical. I like the feel and accuracy you can achieve, and I find it much more satisfying.

                                                  Cheers  David
nel2lar:
krv3000
Is your vice a drill press or a milling vice. Nice project. That was the way a man was trained to start with. If he could master that he moved on, if not he got the boot. Nice work looking for the finally. 
Cheers
Nelson Collar
krv3000:
hi its still on gowing as to the type i beleve it to be a vice to be used on a surfice grinder normely nown as a tool mackers vice when you served your time its one of thows things you make i hope the maker of this one improved as time whent on will post mor pics i had to replace the tope of the scruw that a taches to the moving vice jaw and make a new plate as bin biz with other things so its bin shuved to one side
Navigation
Message Index
Next page

Go to full version