| Gallery, Projects and General > Project Logs |
| Popular Mechanics Boiler |
| << < (12/23) > >> |
| vtsteam:
Brazed: |
| vtsteam:
And done. It works great -- at least blowing through it. It seems quite free in the open direction, and instantly seals in the other. Horizontal orientation doesn't bother it. Quite happy with this result! |
| tom osselton:
Looks good well done! |
| vtsteam:
Thanks Tom! :beer: Today I started work on the pump base valve. First I drilled through 1/8": |
| vtsteam:
Then I drilled 7/32" for the stainless ball, as done yesterday. And after, opened out to tap size for 1/8" pipe thread: |
| Navigation |
| Message Index |
| Next page |
| Previous page |