The Breakroom > The Water Cooler

What to do in an idle moment.

<< < (4/4)

jemglen:
Looks like the 'bangers' we used to make as kids… two bolts, a nut to join them and a few shavings of match heads. Throw it up into the air and wait for the explosion  :ddb:

This however, looks far too refined for that  :D

Jerry

John Hill:
This one does not come apart that way Jerry.

sbwhart:

--- Quote from: jemglen on April 06, 2009, 04:01:34 AM ---Looks like the 'bangers' we used to make as kids… two bolts, a nut to join them and a few shavings of match heads. Throw it up into the air and wait for the explosion  :ddb:

This however, looks far too refined for that  :D

Jerry

--- End quote ---

Ho happy day's

That's the sort of thing I was always up to


Stew

ozzie46:

   Part is actually 3 pieces. 2 piece shaft and a nut. Bore end of 1 piece of shaft and thread internally.
   Turn smaller dia on other shaft and thread to match bore on other shaft. Screw together, then single point thread outer dia on lathe. Take apart, add nut to match thread on outer dia then screw shaft back together. Voila captive nut! ::)

   Hope I didn't rain on anyones parade.

  Ron

Navigation

[0] Message Index

[*] Previous page