Author Topic: Plans for Palmer engine  (Read 10067 times)

Offline Nemt

  • Newbie
  • *
  • Posts: 2
Plans for Palmer engine
« on: March 29, 2014, 08:08:11 AM »
Hello every one,
An old frien of mine came back from America with a set of castings. They are meant for making a model from a Palmer Bros engine, 2 clinder 4-stroke.
There was a drawing signed H Upshure 12-15-00.
Problem is that it is for a singe cylinder engine. The castings are for a 2-cylinder.
Does any one know about or have the drawings/plans for this engine?