| Gallery, Projects and General > Project Logs |
| Building a milling machine |
| << < (43/44) > >> |
| awemawson:
Norman, do you know what type of motor it is? (DC with a chopping controller/ 3 phase AC with an inverter drive etc) I'm sure with a few specifics revealed we can sort it out between us :coffee: (A few pictures of the motor and driver would help) |
| NormanV:
Andrew, I am in awe of you skill at trouble shooting. I am not so good at it. I knew that I would be asked technical questions. Please wait until I am sober and I will have a look. :lol: |
| awemawson:
.... sobriety doesn't always help :clap: :beer: :beer: :beer: |
| NormanV:
It's alive! :D I finally got around to having a look at it. I took the cover off the speed controller and found a fuse that had blown. Fortunately I have a duplicate controller and tried the fuse from that. It is now working but obviously the fuse blew for a reason, I will see how this one holds out. I can't understand the markings on the fuse cap, it is either P4/L250 or P4AL250, can anyone tell me what I need to ask for when I go to buy a replacement? |
| Neubert1975:
glad you got it up and running again. when doing a google search for P4AL250 it comes up with a 5x20mm slow250v 1A glas fuse, if thats the right one, they can be found in all electronic shops. |
| Navigation |
| Message Index |
| Next page |
| Previous page |