| The Breakroom > The Water Cooler |
| car boot sale |
| << < (24/60) > >> |
| S. Heslop:
I remember at Tanfield a guy had a story about a technician at his old workplace hiring a powder nailgun to put some coat hooks up on a breezeblock wall, selecting the most powerful charge, and having it fire through into a corridor and kill a woman on the other side. I thought it sounded like a bit of a silly story but there's a similar one on that website. This nailgun has a captive piston at least, but it is an awkward lump to hold. I got a bit of a fright testing it on some 5mm mild steel plate, using the weakest charge in the box. The nail not only went through the plate but also put a considerable dent into it. It's not a tool I see myself using often, but there's been a few times in the past where i've wished I had one. |
| awemawson:
I was 'testing' mine when I got it years back, by fixing a 4x2 batten to a breezeblock wall. The pin went right through the wall, across 4 foot of space, penetrated the steel enclosure of my Moog Hydrapoint 1000 nc machine, and destroyed a power supply - after that I treated it with the greatest respect :bugeye: |
| lordedmond:
Yes used one of those hilt guns at the iron works got a flattened finger from one , not the way you think but the bit you belt with a hammer can recoil trapping your finger between it and the hammer shaft those i think took a .22 blank or it could be .25 in varying power levels black was the strongest with white the weakest , we did also have a .38 pistol type but it usually fell to bits when you used it , the best blank firing tool was the .38 cable spike clamp it round the underground steel wire armoured cable to prove dead put in the blank tie a long piece of string on and pull , ok unless you had a know all engineer who insisted he knew which cable it was and disregarded the beeper , well after we used it and half the works shut down , we could not find him for some hours :Doh: good tools used in the correct space but can be lethal Stuart |
| appletree:
--- Quote from: vintageandclassicrepairs on June 07, 2015, 09:23:41 AM ---Hi All, Steve, I thought those old versions of hilti guns were no longer allowed in construction ?? Probably with very good reason?? http://www.nail-gun-accidents.com/pages/nail_gun_lawsuits.html Where I worked we had to have training from Hilti on the use of the model we had We were then issued with a permit to use them lasting 2 years if I remember correctly As Andrew said, they give a fair old kickback :bugeye: We were not allowed to use them working from a ladder, fairly obvoius really Thats a bit of an untruth, not 35 yrs in Powergen what about the good old CEGB with all its faults?? Remember that you cannot grow new digits/ eyes and other body parts :( :( :( Johns 2 cents worth ( +35 years experience in Powergen) --- End quote --- |
| vintageandclassicrepairs:
Hi, --- Quote ---Thats a bit of an untruth, not 35 yrs in Powergen what about the good old CEGB with all its faults?? --- End quote --- The "powergen" reffered to was/is the one here in Ireland, no point talking ESB to non Irish people Hope this clears up any misunderstanding?? Regards John |
| Navigation |
| Message Index |
| Next page |
| Previous page |