Gallery, Projects and General > How do I??

Some info on the would be of great help!

<< < (2/2)

rudydubya:
Dennis, I think the company is now called Wells-Index.  You might try an email to them at wellsindex@aol.com.  Their website is at http://www.wells-index.com/.

Regards,
Rudy

TLGriff:
Dennis,

Another option to consider is that Wells-Index will regrind that spindle to an R8 taper. There is a lot more tooling available for the R8 than the B&S #9. I think they charge about $250.

Tom

volcom7114:
Thanks Tom and yes they will regrind the spindle for 285 plus 80 for a new draw bar and they also want it shipped to them in a hand made wood box and you have to pay shipping their and back of course so prob looking at around 5-600 bucks but on the good side to it is all your B&S tooling will still fit as they said their will still be some B&S taper left in the spindle but he said you wouldnt want to do have side milling as their would be some slop in the collet/tool holder around the bottom of the spindle so to me it really makes your B&S tooling useless for anything other than a drill press..

Dennis

Navigation

[0] Message Index

[*] Previous page