| Gallery, Projects and General > How do I?? |
| Some info on the would be of great help! |
| << < (2/2) |
| rudydubya:
Dennis, I think the company is now called Wells-Index. You might try an email to them at wellsindex@aol.com. Their website is at http://www.wells-index.com/. Regards, Rudy |
| TLGriff:
Dennis, Another option to consider is that Wells-Index will regrind that spindle to an R8 taper. There is a lot more tooling available for the R8 than the B&S #9. I think they charge about $250. Tom |
| volcom7114:
Thanks Tom and yes they will regrind the spindle for 285 plus 80 for a new draw bar and they also want it shipped to them in a hand made wood box and you have to pay shipping their and back of course so prob looking at around 5-600 bucks but on the good side to it is all your B&S tooling will still fit as they said their will still be some B&S taper left in the spindle but he said you wouldnt want to do have side milling as their would be some slop in the collet/tool holder around the bottom of the spindle so to me it really makes your B&S tooling useless for anything other than a drill press.. Dennis |
| Navigation |
| Message Index |
| Previous page |