The Breakroom > Resources

For beginners to machining 2

(1/1)

bogstandard:
Here is another site that you might like to have a poke around if you are newish to machining, or even if you are experienced, it gives some basic insights into machining and a few very good tips.

http://www.nmri.go.jp/eng/khirata/metalwork/index_e.html

It is worth spending a little time having an easy read thru the whole lot.

John

ja2on:
nice link much appreciated  :thumbup:
Lots of great info 

Brass_Machine:
Nice link John! Helpful indeed.

Eric

Brass_Machine:

--- Quote from: ja2on on March 25, 2009, 02:35:53 PM ---

--- End quote ---

Thanks Ja2on... another smiley to add!

Eric

Navigation

[0] Message Index