| The Breakroom > Resources |
| For beginners to machining 2 |
| (1/1) |
| bogstandard:
Here is another site that you might like to have a poke around if you are newish to machining, or even if you are experienced, it gives some basic insights into machining and a few very good tips. http://www.nmri.go.jp/eng/khirata/metalwork/index_e.html It is worth spending a little time having an easy read thru the whole lot. John |
| ja2on:
nice link much appreciated :thumbup: Lots of great info |
| Brass_Machine:
Nice link John! Helpful indeed. Eric |
| Brass_Machine:
--- Quote from: ja2on on March 25, 2009, 02:35:53 PM --- --- End quote --- Thanks Ja2on... another smiley to add! Eric |
| Navigation |
| Message Index |