The Shop > Electronics & IC Programing

Home built Amplifier

<< < (2/2)

John Rudd:
 :doh:d
--- Quote from: ibuildstuff4u on January 05, 2014, 08:07:52 PM ---My next project is a 100watt @ 8 ohm mosfet amplifier.  This will be just a mono amp.

Dale P.

--- End quote ---
Do you have the circuit diagram to share please?

ibuildstuff4u:
The amp is called the NMOS 200.  Here is a link to the site with all of the information.
https://sites.google.com/site/quasisdiyaudiosite/nmos-series/nmos200-1

My brother also made me up a stereo PCB for the NMOS 200 amp and I have it 99% done, but am missing a few parts for it.  One of these days I will have to place an order to mouser for a bunch of parts.

The amp in the picture is the DX Blame MKIII Destroyer.  This is NOT my finished amp, I have the bare boards and hope to build it some day but with 10 transistors per board it's going to be pricey to build.  The eight large caps (four for each board) are almost $100 to buy.

Dale P.

Brass_Machine:

--- Quote from: ibuildstuff4u on January 05, 2014, 11:57:20 PM ---...

What type of projects are your nephews asking you to do?
Dale P.

--- End quote ---

The oldest wants me to do some carbon fiber fab work for his car. Wants to replace a bunch of body stuff. Wants help designing a CAI\Ram air for it...

The youngest wants some case mods done for his PC.

Have you done a tube amp yet? (sorry if I already asked you this)

Navigation

[0] Message Index

[*] Previous page