Gallery, Projects and General > Project Logs |
Tapping Stand |
<< < (3/10) > >> |
Dan The Man:
We then took away the safety shield |
Dan The Man:
On this drill the coil is too strong to push from above so we need to take it out and weaken it |
Dan The Man:
We then took off 2 of the 3 handles. I saw that we could use them on our lathe, as the tool change block needs a thin but strong item to tighten it and offen they bend and we need to make new ones. |
philf:
--- Quote from: Dan The Man on December 22, 2013, 10:24:37 AM ---anyone know how to get pics were you want not just at bottom? sorry im new --- End quote --- Hi Dan, See http://madmodder.net/index.php/topic,607.msg2864.html#msg2864 The method requires that your photos are hosted somewhere on the web (e.g. Photobucket). Cheers. Phil. |
Dan The Man:
Thank You will try it |
Navigation |
Message Index |
Next page |
Previous page |