| Gallery, Projects and General > Gallery |
| Some tools I have built |
| (1/2) > >> |
| Bishop:
If this place is like the other forums I'm a member of then we all love photos! Here are a few of the more useful tools I have built for my shop. A small tap guide Targential tool holder for a QCTP Angle plate that is held in the mill vice, very useful tool. Radius turner ER 32 collet chuck One more of the collet chuck Shawn |
| ivansgarage:
Hi Bishop welcome, The tap guide? looks like you have some kind of chuck that holds the taps? What is it? four jaw? Ivan |
| Bishop:
Hello Ivan The chuck is just a small drill chuck I had lying around. I only use it for small taps and so far have had no issue with the tap spinning in the chuck. Shawn |
| Arbalist:
Nice work! |
| 75Plus:
--- Quote from: Bishop on December 15, 2013, 09:21:05 PM ---Hello Ivan The chuck is just a small drill chuck I had lying around. I only use it for small taps and so far have had no issue with the tap spinning in the chuck. Shawn --- End quote --- Shawn, Look at this thread. http://madmodder.net/index.php/topic,2289.0.html Some of the last of the pictures shows how I went about modifying a standard tap wrench to attach to a longer shaft. Joe |
| Navigation |
| Message Index |
| Next page |