The Shop > Electronics & IC Programing
power regulator circuit
John Rudd:
--- Quote from: shipto on December 15, 2013, 09:08:12 AM ---Its just a diagram I found from google when I put in "hv power regulator".
I am going to play with this and see what does what and if i end up blowing one of the transisters it wont be a big deal with my limited knowledge of this electronic wizardry.
--- End quote ---
Rather that than injuring yourself.... :zap:
How did the existing controller die? Swarf in the box?
Is it the board with the mosfet(s) on it?
They can be troublesome....
shipto:
--- Quote from: John Rudd on December 15, 2013, 09:19:05 AM ---
Rather that than injuring yourself.... :zap:
--- End quote ---
not too much worry of that I am playing with this with 3 rcds in place (house, workshop and a plug in one) not to mention a healthy respect of the electricity :)
--- Quote ---How did the existing controller die? Swarf in the box?
Is it the board with the mosfet(s) on it?
They can be troublesome....
--- End quote ---
I assume stray swarf was the culprit ( might not have been) the panel was out of the machine but still connected to the plastic board at the time just went pop and upon inspection I saw some of the tracks had blown around the relays.
Navigation
[0] Message Index
[*] Previous page
Go to full version