| The Shop > Electronics & IC Programing |
| power regulator circuit |
| << < (2/2) |
| John Rudd:
--- Quote from: shipto on December 15, 2013, 09:08:12 AM ---Its just a diagram I found from google when I put in "hv power regulator". I am going to play with this and see what does what and if i end up blowing one of the transisters it wont be a big deal with my limited knowledge of this electronic wizardry. --- End quote --- Rather that than injuring yourself.... :zap: How did the existing controller die? Swarf in the box? Is it the board with the mosfet(s) on it? They can be troublesome.... |
| shipto:
--- Quote from: John Rudd on December 15, 2013, 09:19:05 AM --- Rather that than injuring yourself.... :zap: --- End quote --- not too much worry of that I am playing with this with 3 rcds in place (house, workshop and a plug in one) not to mention a healthy respect of the electricity :) --- Quote ---How did the existing controller die? Swarf in the box? Is it the board with the mosfet(s) on it? They can be troublesome.... --- End quote --- I assume stray swarf was the culprit ( might not have been) the panel was out of the machine but still connected to the plastic board at the time just went pop and upon inspection I saw some of the tracks had blown around the relays. |
| Navigation |
| Message Index |
| Previous page |