| The Shop > Metal Stuff |
| Plasma Cutter |
| (1/6) > >> |
| doubleboost:
Hi Lads Got a new toy to play with John |
| AdeV:
I can't watch the video right now as I'm on a client site - but they are rather brilliant things, aren't they? I bought an old transformer based Cebora (partly because I don't trust this newfangled Chinese inverter stuff, and partly just because I like the heavy duty), it's brilliant. Cuts 10mm steel like it wasn't there. Cuts aluminium too. Shame it deosn't cut wood, really, it'd be perfect if it did... |
| trevoratxtal:
Hello Doubleboost They are great machines,BUT if not fitted with low air pressure cut out can cost a fortune. If it has not got one fit one, Same goes for an air dryer fitted on the air input. (From the clip would suggest is to small fit another in line.) Only set the cutting current to just do the job, over current uses the electrodes quicker! To cut non metals lay a sheet of metal on top up the current and try it. To cut rod or tube make up a hand rotating chuck and keep the torch still, cuts much neater and to the centre. Have fun Trev |
| AdeV:
Mine has the low-air cutout, it has a regulator fitted to the back to keep the input pressure at the right place. No dryer though.... I only have two power settings: HIGH and HIGHER :lol: I like the idea of the chuck... |
| krv3000:
well dun as per john :thumbup: :thumbup: |
| Navigation |
| Message Index |
| Next page |