| Gallery, Projects and General > The Design Shop |
| Wheels, okay then... Castors |
| << < (2/3) > >> |
| 75Plus:
Take a look at this. It may give you some ideas. http://www.grizzly.com/products/D2260A Joe |
| Dawai:
Stick two wheels out one end? put a handle on the other, lift it like a wheel barrow and roll it around. It will sit on the floor till you tilt it onto the wheels to dolly it. Warning, one chunk on the floor can cause a endo-high side.. top heavy.. |
| S. Heslop:
Something like this could work. http://woodgears.ca/mobile_base/table_saw.html Maybe you could make it from steel to survive the weight. |
| Meldonmech:
Simon, that is a neat way of moving a table saw. Cheers David |
| Arbalist:
I can't help Graham but I have the same problem so if you sort it out please post some pictures. :thumbup: My Anvil is only 1 cwt but I reckon the Oak stump it's mounted on weighs about the same! |
| Navigation |
| Message Index |
| Next page |
| Previous page |