| The Shop > Metal Stuff |
| Propane burners |
| << < (2/2) |
| awemawson:
Yes Stuart that was the one ! |
| Meldonmech:
Hi ironman This is one I want to make. I use propane in my crucible furnace which has a burner having a 1 mm jet size, and normal air funneled in through a venturi. What air pressure is required to suit the burner you are using? Thanks for posting such a useful item. Cheers David |
| ironman:
Meldonmech It all depends on how much propane goes through the torch. 4 to 5 bar would be plenty, I had it up to 8 bar and it will blow out the flame if too much air is turned on. Here ya go vtsteam I made a drawing of the burner. |
| vtsteam:
Thank you Ironman! I will definitely try it. |
| Navigation |
| Message Index |
| Previous page |