| Gallery, Projects and General > Project Logs |
| HH. Grinding rest |
| << < (2/6) > >> |
| vtsteam:
John, I have the book, too. Can you check these dimensions on your part? |
| ziggar:
if you've made it to plan as the book shows, and all your sizes are correct, then it should all be just dandy once you make the gib strip and put that in the assembly as required i made one and it all works and fits as it should do |
| John Rudd:
--- Quote from: vtsteam on October 25, 2013, 12:31:30 PM ---John, I have the book, too. Can you check these dimensions on your part? --- End quote --- Vt, thanks for sense checking.....I away for the weekend atm but will check when I get home Ziggar Thanks for the confidence boost....again, I'll see once it's all finished Onwards and upwards..... :dremel: |
| vtsteam:
Also, John, The lower slide dovetail appears to be 8.5 mm deep. (it would be easy to misread the tiny dwg and make them 6mm deep) The slide swivel pieces appear to be 8mm deep. I'm having a hard time visualizing the finished assembly, even with the assembly drawing, but it seems like the dovetails would therefore ride on the bottom rather than the shoulders. |
| John Rudd:
When I return home I'll take photo which should make things clearer |
| Navigation |
| Message Index |
| Next page |
| Previous page |