Gallery, Projects and General > Gallery

Little Grinding Jig for Diamond Stone

<< < (2/2)

philf:
Joules,

I have a commercially made Bergeon screwdriver sharpening tool which has a self centering feature.



You squeeze the two ends together, pop the screwdriver in and release the ends which clamps and centres the screwdriver.



I was never too happy using it to do the end of the screwdriver blade so I made a dual purpose widget to square off the ends.



You set the tip of the blade so that the single bearing is just clear of the stone - it stops cutting when the bearing touches the stone.

It also doubles up for graver sharpening.



I have a commercial graver sharpener but was never very happy with it.



I also have the Eclipse plane and chisel honing aid which Fergus mentioned. This is a useful tool. To set the angles you adjust the protrusion of the blade.







Phil.

Joules:
Phil that jig you made for the gravers is excellent...  I was inspired by the Bergeon I saw online.  I am taking on board some of the other comments and looking to expand on those ideas for other sharpening jobs.

      Cheers guys

                               Joules

Navigation

[0] Message Index

[*] Previous page