The Shop > Our Shop
24' x 35' Workshop Project
rockknocker:
I haven't done a good job keeping this thread up-to-date... The shop has been finished (or nearly so) for about a month. With some help from my brother (who was anxious to start using his newly purchased machine tools), we ended up ripping out most of the wall dividing the two halves of the shop. We left some of the wall in place, but cut it short and turned it into a much smaller office. This allows me to move the model T and all other "storables" into the newly created space, massively increasing the amount of floor space available to work in!
With that done, we insulated all the walls, added 110V and 220V outlets to every wall, and buttoned everything back up. We also threw out or donated a lot of items that were taking up space, mainly "future projects" that I would likely never get to. The metalworking machines were all moved to their final resting places and wired in. There are a few small things to finish up (and there always will be), but for the most part everything is working!
I've attached a panoramic picture of the shop so you can see how it's turned out. Ignore the odd angles on everything, those are artifacts of the panoramic photo app on my phone.
Navigation
[0] Message Index
[*] Previous page
Go to full version