Author Topic: Bridgeport interact  (Read 5308 times)

Offline jb3cx

  • Jr. Member
  • **
  • Posts: 86
Bridgeport interact
« on: September 19, 2013, 02:30:57 AM »
Hi,all I have a bridgeport interact cnc series 1 mk2 mill, just burnt the spindle motor out,got a price from a local company in the n.east for to rewind it, nearly had a heart attack ,telephone numbers,
I know a lot of people on here have the same machine ,so does any one have a spare spindle motor for sale,or where I can buy one ,or a fair price to rewinde mine,without having to remortgage my house or sell the car,

Offline John Stevenson

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1643
  • Nottingham, England.
Re: Bridgeport interact
« Reply #1 on: September 19, 2013, 03:50:52 AM »
You won't get a cheap price to rewind one due to labour and cost of materials.
At the moment the cut off for buying new against a rewind is sitting around the 15 HP mark.

You may not get a new motor in that position if it's the one that hangs down due to length.

John Stevenson

Offline tekfab

  • Full Member
  • ***
  • Posts: 133
Re: Bridgeport interact
« Reply #2 on: September 19, 2013, 05:00:35 AM »
Depends on what gives you a heart attack, i consider £313 plus vat for a rewind of a 2 speed 3 phase motor to be acceptable but others might not ?

Mike

Offline jb3cx

  • Jr. Member
  • **
  • Posts: 86
Re: Bridgeport interact
« Reply #3 on: September 19, 2013, 08:55:45 AM »
I could stand that ,but I am talking £1000+vat so at the end of the day that's not all that cheap,when some of the machines on flea bay, go from say £1000 to £1600,I should have bought a couple just to keep as spares,when I had the chance, and the space ,
Peter.

Offline John Stevenson

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1643
  • Nottingham, England.
Re: Bridgeport interact
« Reply #4 on: September 19, 2013, 10:18:47 AM »
PM sent with better price
John Stevenson

Offline AdeV

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2448
  • Country: gb
Re: Bridgeport interact
« Reply #5 on: September 19, 2013, 07:08:46 PM »
I could stand that ,but I am talking £1000+vat so at the end of the day that's not all that cheap,when some of the machines on flea bay, go from say £1000 to £1600,I should have bought a couple just to keep as spares,when I had the chance, and the space ,
Peter.

Peter,

I've been thinking exactly the same thing recently.... I blew a servomotor on mine, when I told the rewind guy I could get one from the US for £700, he said go for it - it'll be cheaper than fixing the broken one...!

Like you, I am looking for decent 2nd hand machines to buy for spares, there's a tidy Interact 2 Mk 4 on right now which would be perfect if it weren't for the TNC150 controller  :doh: A TNC151 and I'd have been all over it like a rash.
Cheers!
Ade.
--
Location: Wallasey, Merseyside. A long way from anywhere.
Occasionally: Zhengzhou, China. An even longer way from anywhere...

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2188
  • Country: gb
Re: Bridgeport interact
« Reply #6 on: September 20, 2013, 04:04:11 PM »
hi mell nose sumwher that dus rewinds i will get the number for them

Offline jb3cx

  • Jr. Member
  • **
  • Posts: 86
Re: Bridgeport interact
« Reply #7 on: September 21, 2013, 03:04:04 AM »
 :ddb:cheers bob ,also got a number of JS as well   :)