Gallery, Projects and General > Neat Stuff
Pulse jet in your garage?
(1/1)
Chris_b:
From design news magazine email; the video is quite long but worth a look. This has to fall into the "don't try this at home" category :bugeye:. But then I always wanted to make a jet engine.....
John Tindall's pulsejet engine employs a cyclonic-valve radial design, which makes for smoother airflow.
Get Build Instructions >>
http://email.designnews.com/cgi-bin2/DM/y/eBEQ50O1FKK0W7G0DtZ50Em&rid=2478382
Watch the Video! >>
http://email.designnews.com/cgi-bin2/DM/y/eBEQ50O1FKK0W7G0DtZ70Eo&rid=2478382
bogstandard:
Hi Chris,
A bit about pulse jets on the site is here
http://madmodder.net/index.php?topic=648.msg3887#msg3887
Plus a site with plans to get you making the valveless types.
I think somewhere, I have the plans for a fully working version of the petal valve type you showed in your post, but they do consume the valves at a fair rate.
I showed a bit of interest in these a few years back, when they were being used for tethered model hydroplanes. But I think they died a slow death because of the noise issues.
There were a few German manufacturers still making them, last time I was at Nurnberg toy fair. A fair few years ago now though.
John
Navigation
[0] Message Index
Go to full version