The Shop > Our Shop
Any old iron (as long as it's British!)
Andrew Wildman:
Just thought I would show some pictures of my workshop. I have moved house in the last few months and so after a lot of faffing it is just about usable.
Cromwell and Harrison lathes and ajax drill
Victoria and AEW mills, herbert high speed drill and a chinese band saw
shaper
surface plate
grinding and welding area
assembly area
clean and electronics bench and CNC centec mill
Andrew Wildman:
Now the workshop is up and running I can carry on with my tool and cutter grinding restoration project
the vertical way was very worn so I lapped in parallel to 0.005mm along its length. Pre lapping errors:
aligning the base using a precision level:
scraping ways flat and parallel
machining top of the table
base complete
scraping bottom of table:
measuring x ways
Andrew Wildman:
measured results
showing over 0.5mm wear!
Machining ways
awemawson:
I love it! 1 2 3 blocks AND a gardening fork in the same shot. :lol:
Andrew Wildman:
That is British sheds for you!
The oven was in there for a few weeks, although not working
Navigation
[0] Message Index
[#] Next page
Go to full version