| The Shop > Electronics & IC Programing |
| Turn on 12v DC with logic PIC output. |
| << < (4/5) > >> |
| raynerd:
Hi Dave - many thanks for your effort but I am going to go down the microcontroller route since there are a few others uses of the arduino that are going to be in the machine. I tested the output of the optical line output tonight with my logic probe. I know this is what I was expecting to see, but it was still pleasing to see this happening!! |
| DMIOM:
Chris, I love the electro-mechanical cross-over - I've never seen anyone attach a test lead with a toolmaker's clamp before! Tiny surface-mount ICs might be somewhat more of a challenge unless Ralph (flyingtractors) has a hand in it! Dave |
| raynerd:
:) :) :) haha I thought someone may pick up on that!! It works so....! |
| awemawson:
It may have been subliminal suggestion, as I saw that picture earlier, but today I was hunting around for a quick temporary way to secure an earth lead to the PLC chassis on that bar feeder I'm working on, and used a small toolmakers clamp ! |
| raynerd:
It is the way forward. I believe it is not long before they start teaching the use of a tool makers clamp as a means of connecting electrical cables. :med: :lol: |
| Navigation |
| Message Index |
| Next page |
| Previous page |