The Shop > Metal Stuff
NeoTechs newbie melting endevours. ;)
Mayhem:
Sounds like you are making some progress Neo. More pictures would be helpful.
MetalCaster - have you posted any info on your oil burner on here at all? Oil is my only fuel option, as I have an abundance of it and propane is too expensive.
NeoTech:
So.. well. burner experimentation continues.. and some.. figuring out.. I guess cuz i cant really find this info myself and had to read some gas physics.
NeoTech:
Reference regarding venturi gas speeds..
ironman:
mayhem look at http://madmodder.net/index.php/topic,8790.0.html reply 15
MetalCaster:
Thanks Ironman, I did not notice that post, yep, the details of the oil burner are at that post.
I used my propane burner again yesterday.
It started the oscillation and then burning in the burner tube, and I had to remember to close the choke down quite a bit to start it.
As I said before, this type of propane burner is very sensitive to choke position.
I have to start mine with the choke open about 1/4".
Once things start to heat up, I can increase gas pressure and open the choke a relative amount.
If I open the choke too far, the burner goes unstable.
But with the correct choke opening, the burner should work fine and not blow back into the burner tube.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version