| The Shop > Metal Stuff |
| NeoTechs newbie melting endevours. ;) |
| << < (6/10) > >> |
| Mayhem:
Sounds like you are making some progress Neo. More pictures would be helpful. MetalCaster - have you posted any info on your oil burner on here at all? Oil is my only fuel option, as I have an abundance of it and propane is too expensive. |
| NeoTech:
So.. well. burner experimentation continues.. and some.. figuring out.. I guess cuz i cant really find this info myself and had to read some gas physics. |
| NeoTech:
Reference regarding venturi gas speeds.. |
| ironman:
mayhem look at http://madmodder.net/index.php/topic,8790.0.html reply 15 |
| MetalCaster:
Thanks Ironman, I did not notice that post, yep, the details of the oil burner are at that post. I used my propane burner again yesterday. It started the oscillation and then burning in the burner tube, and I had to remember to close the choke down quite a bit to start it. As I said before, this type of propane burner is very sensitive to choke position. I have to start mine with the choke open about 1/4". Once things start to heat up, I can increase gas pressure and open the choke a relative amount. If I open the choke too far, the burner goes unstable. But with the correct choke opening, the burner should work fine and not blow back into the burner tube. |
| Navigation |
| Message Index |
| Next page |
| Previous page |